home *** CD-ROM | disk | FTP | other *** search
- # BERICHTENBESTAND VOOR RXCLUS V 6.6
-
- # Texts may be modified or translated, but the length mentioned in brackets
- # may not be exceeded.
- # Comment lines must start with a "#" in the first column. You can add as
- # many comment lines and blank lines as you wish.
- # The sequence and number of the texts may NOT BE CHANGED !
-
-
-
- # WOORDENSCHAT
-
- # Abrev. for the days of the week (7*3 letters without spaces,Sunday first)
- zonmaadinwoedonvryzat
- # Letter used to accept a proposal
- J
- # Letter used to reject a proposal
- N
- # Translation of the word "to" (5)
- naar
- # Translation of the word "or" (8)
- of
- # Translation of the word "for" (8)
- voor
- # Translation of the word "End" (6)
- Einde
- # Translation of the word "next" (6)
- verder
- # Translation of the word "Latitude" (15)
- Breedtegraad
- # Translation of the word "Longitude" (15)
- Lengtegraad
- # Translation of the word "Sunrise" (15)
- Zonsopgang
- # Translation of the word "Sunset" (15)
- Zonsondergang
- # Translation of the word "Country" (15)
- Land
- # Translation of the word "Continent" (15)
- Continent
- # Translation of the word "command" (12)
- bevel
- # Translation of the word "unknown" (15)
- onbekend
- # Translation or abreviation of "Record" (6)
- Lijn
- # Translation of "Band" (12)
- Band
- # Translation of "Mode" (12)
- Mode
- # Translation of "Status" (12)
- Status
- # Translation of "invalid" (20)
- ongeldig
- # Translation of "must be" (15)
- moet zijn
- # Translation of "not found" (20)
- niet gevonden
- # Translation of "try" (20)
- poging
- # Translation of "Quit RXCLUS" (40)
- Verlaten RXCLUS
-
-
- # TEKSTEN VOOR DE TOP LIJN
- # (spaces at the beginning of the lines are added automatically)
-
- # during the DX database viewing (75)
- QRG DX-Call Datum UTC Opmerkingen Logger
- # during the WWV database viewing (74)
- Datum UTC Flux A K Voorspelling Logger
-
-
- # TEKSTEN VOOR DE ONDERSTE LIJN
-
- # while receiving informations (17)
- DX ontvangst
- # while monitoring the traffic (17)
- Monitor mode
-
-
- # TEKSTEN VOOR HET 'HELP' VENSTER (F1)
- # MON=ook gebruikt voor de 'monitor help'
-
- # Translation of "HELP" (5)
- HELP
- # Help on Alt-B (51) (MON)
- DX bel (0:nooit,1:niet wkd,2:niet wkd/cfm,3:altijd)
- # Help on Alt-D (DOS Shell) (25) (MON)
- DOS Shell
- # Help on Alt-G (30) (MON)
- Schakel bel aan/uit
- # Help on Alt-M (50) (MON)
- Schakelen tussen Monitor/DX-Ontvangst
- # Help on Alt-N (40) (MON)
- Herneem de buffer
- # Help on Alt-P (30)
- Schakel drukker aan of uit
- # Help on F2 (text added after "SHOW/DX") (25)
- alle informatie
- # Help on F4 (text added after "SHOW/DX") (43)
- per DX call (met * : deel van de call)
- # Help on F5 (text added after "SHOW/DX") (43)
- per band (1.8 tot 24250 MHz)
- # Help on F6 (text added after "SHOW/DX") (43)
- op commentaar
- # Help on F7 (text added after "SHOW/DX") (43)
- per logger
- # Help on F8 (DXCC database) (40) (MON)
- DXCC database
- # Help on F9 (IOTA) (50) (MON)
- Gewerkte en bevestigde IOTA nummers
- # Help on F10 (SHOW/COUNTRY) (51) (MON)
- Landinformatie (gewoonlijk 2 letters)
-
-
- # TEKSTEN VOOR HET 'HELP VENSTER' IN MONITOR MODE (F1)
-
- # Help on Alt-P (30)
- Zend een wachtwoord
- # Help on Alt-R (50)
- Start of stop wegschrijven op schijf
- # Help on Alt-S (30)
- Zend een tekstbestand
- # Help on Alt-W (35)
- Schrijf de buffer weg op schijf
- # Help on Alt-F1..F9 (40)
- 'Korte weg' naar zend bevelen
- # Help on Alt-F10 (40)
- Lijst beschikbare 'korte weg' bevelen
- # Help on Up (40)
- Herneem de laatst gezonden lijnen
-
-
- # TEKSTEN GEBRUIKT MET DE FUNCTIE-TOETSEN F2...F10 IN ONTVANGST MODE
-
- # F2+F3: warning if the SHOW mode is not available
- # (1st line) (50)
- Geen toegang tot de databases
- # (2nd line) (50)
- (DISK=0 in RXCLUS.CFG)
- # F2: warning if DXINFO.DAT cannot be opened (80)
- Kan de DX database niet openen of aanmaken !
- # F2: warning if DXINFO.DAT is empty (50)
- DX database is leeg !
- # F3: warning if WWVINFO.DAT cannot be opened (80)
- Kan de WWV database niet openen of aanmaken !
- # F3: warning if WWVINFO.DAT is empty (50)
- WWV database is leeg !
- # F4: prompts for the DX callsign (70)
- Zoekargument in de DX call's :
- # F5: prompts for the frequency band (60)
- Frequentieband in MHz :
- # F6: prompts for the comment to look for (70)
- Zoekargument in het commentaar :
- # F7: prompts for the logger to look for (70)
- Zoek DX-melding(en) van logger :
- # F4..F7: Text on the bottom line in criterial search mode (31)
- Zoekactie
- # F4..F7: Text on the bottom line while seeking for matching infos (31)
- Bezig met zoeken ... wachten a.u.b.
- # Message if no record was found
- # (1st line) (40)
- Geen informatie
- # (2nd line) (40)
- gevonden !
- # Alt-D: Text displayed at the beginning of a DOS Shell session (60)
- Tik EXIT om terug te keren naar het programma RXCLUS ....
- # Alt-D: warning if no DOS SHELL can be started (60)
- Starten COMMAND.COM onmogelijk :
- # Alt-D: out of memory (30)
- Te weinig RAM-geheugen
- # Alt-D: DOS error number (25)
- DOS fout nummer
- # F9: error message if the length of IOTA.DAT is not 1200 bytes (40)
- IOTA.DAT must be 1200 bytes in length
- # F10: prompts for a prefix (50)
- Landprefix :
- # warning if the prefix was not found (50)
- Prefix niet gevonden !
- # Alt-N : confirmation before restarting the DX buffer (30)
- DX buffer hernemen ?
- # Alt-N : confirmation before restarting the monitor buffer (40)
- Monitor buffer hernemen ?
-
-
- # BERICHTEN GEDURENDE DATABASE GEBRUIK (NA F2 of F3)
-
- # F2: prompts the user to edit a record
- # (1st line) (40)
- Wijzig nu de informatie
- # (2nd line) (40)
- Beƫindig met <CR>
- # (3rd line) (40)
- Terugkeren met <Esc>
- # F2: prompts for a confirmation before saving the changes (40)
- Wijzigingen opslaan op schijf ?
- # F4 : prompts for a confirmation before deleting all tagged records
- # (1st line) (50)
- Schrappen alle aangeduide
- # (2nd line) (50)
- lijnen ?
- # F5: prompts for a confirm. before deleting the beginning of the file (50)
- Schrappen van alle informatie ouder dan deze ?
- # F5: confirmation that the old database was saved... (40)
- Oude database herbenoemd als .BAK
- # F5: ...and that the wanted records are being copied
- # (1st line) (50)
- Copieren van de data in
- # (2nd line) (50)
- de nieuwe database ...
- # F5: confirmation that the new database is ready
- # (1st line) (50)
- De nieuwe database is nu beschikbaar
- # (2nd line) (50)
- de oude werd opgeslagen met de
- # (3rd line) (50)
- bestandsuitbreiding .BAK
-
-
- # BERICHTEN VOOR ONDERHOUD VAN DE DXCC DATABASE (F8)
-
- # Confirmation before removing a country from the database (40)
- Dit land schrappen uit de database ?
- # Title of the DXCC search window for not wkd, not cfm,... on a band/mode (50)
- Toon de landenlijst per band/mode en de status
- # Text at the top of the DXCC scores window (30)
- huidige DXCC landen
- # Translation of "Worked" (11)
- Gewerkt
- # Translation of "Confirmed" (11)
- Bevestigd
- # Text annoucing the total of the 9 bands (14)
- Alle banden
-
-
- # MESSAGES FOR THE IOTA FUNCTION (F9)
-
- # F2: Asking which IOTA reference you want to go to (30)
- Ga naar IOTA-referentie
- # F3: Title of the search window for IOTA numbers by continent/status (50)
- Toon IOTA referenties per continent/status
-
-
- # BERICHTEN BIJ BESTANDSBEHEER
-
- # Translation of the word "file" (12)
- Bestand
- # Question about the file name (30)
- Bestandsnaam ?
- # Asking for the name of a file to receive (37)
- Ontvangen bestand opslaan als
- # Asking for the name of a file to transmit (30)
- Naam van het te zenden bestand ?
- # Asking for the name of the file to write the buffer to (37)
- Bestandsnaam voor de buffer ?
- # Warning if a file already exists (30)
- Dit bestand bestaat reeds :
- # Warning if a file does not exist (30)
- Bestand niet gevonden
- # Traslation of the word "Overwrite" (15)
- Overschrijven
- # Translation of the word "Append" (15)
- Toevoegen
- # Translation of the word "Abort" (15)
- Afbreken
- # Warning if a file cannot be created (40)
- Bestand kan niet aangemaakt worden !
- # Capture started + how to end it (40)
- Capteren gestart, stoppen met <Alt-R>
- # Capture closed (30)
- Capteren gestopt
- # Warning when a function is temporarily not allowed (40)
- Geen toelating op dit moment
- # Send a password: last received line is not a password request (50)
- Laatst ontvangen lijn is geen wachtwoord vraag !
- # Send a password: available string is too short to answer that request (50)
- Het gegeven wachtwoord is te kort !
-
-
- # BERICHTEN I.V.M. DE DRUKKER
-
- # Translation of the word "Printer" (12)
- Drukker
- # Translation of the word "Printing..." (12)
- Drukken....
- # Translation of "not ready" (15)
- Niet gereed
- # Translation of the word "Target" (20)
- Naar ?